Toilet Paper Holder Stand – First, disassemble shoemaker stand by removing the mold from the top of the shoe. Floor coatings made of old newspapers and put the pieces on top. Coat each piece with spray primer and allow to dry. Turn the pieces and cover on the opposite side of the spray primer prior notification, pieces of dry again.
Second Stepsto use toilet paper holder stand, paint pieces of spray paint, using a color that matches the decor of your bathroom. Select white for a classic look that works with any style or black to imitate the look of the original cast. If you prefer a rustic look, run lightly sandpaper the entire surface of the piece before spray painting. Third, craft model piece of wire through the hole in the top of the pedestal cobbler. Bent hanger is also used for this purpose, but you may want to paint the metal hanger for the first time. Use a meter thick as 18, which is strong enough to hold the toilet paper in place.
Fourth, press the individual wire to the end of your toilet paper roll. Pull it out the other end and wrap the two ends of the wire around itself to create a seal. Transfer the toilet paper to withdraw the closure and release. Stand cobbler should stand on its own, even as you pull on a roll of toilet paper. Fifth, place, one of the forms of the walk back to the stand shoemaker. This piece serves as a counterweight to the rest of the stand and holds the stand tipping or falling. These about how to use toilet paper holder stand.
12 To Use Toilet Paper Holder Stand Photos